
ACP 6000
Low inherent internal stress for high dimensional stability during extreme machining.
ACP 6000 is an aluminium precision cast plate that is precision-milled on both sides and has a comparatively high abrasion resistance. It is also characterised by low stress and high dimensional stability, even with complicated machining. To protect the precision-milled surfaces, all plates are provided with a protective film on both sides.
Technical data / specific properties
Chemical Composition
Al alloy type 7xxx
Material Properties
Machinability
very good
Weldability (TIG, MIG)
adequate (with S Al 4043A)
Anodising Properties
good
Polishing
good
Corrosion Resistance
adequate
Eroding Properties
good
Dimensional stability
very good
Typical Mechanical Properties
Tensile Strength Rm
min. 166 MPa (N/mm2)
0.2 % Yield Strength Rp 0.2
min. 105 MPa (N/mm2)
Elongation A
min. 3 %
Brinell Hardness
65 (+/- 5) HB
Typical Physical Properties
Density
2.80 g/cm3
Thermal Conductivity
140 W/(mK)
Electrical Conductivity
19 – 24 MS/m (m/Ω mm2)
Modulus of Elasticity
~71,000 N/mm2
Coefficient of Thermal Expansion
24.6 * 10-6/K
Standard Sizes
Thickness
6 – 220 mm
Width
1570 mm
Length
3670 mm
Tolerances
Surface Finish Ra
≤ 0.3 µm
Tolerance in Thickness
+/- 0.1 mm
Flatness
≤ 8 mm thickness ≤ 0.40 mm
>8 – 12 mm thickness ≤ 0.25 mm
> 12 – 220 mm thickness ≤ 0.13 mm
(Linear measured section 1 m)
Tolerance in Width for plates
0/+10 mm
Tolerance in Length for plates
0/+10 mm
Tolerance (L/W) for cut pieces
≤ 150 mm thickness DIN ISO 2768-m
> 150 mm thickness 0/+3 mm
(Linear measured section 1 m)
Other tolerances on request.