ACP 5754(R) ELOXPURE
Increased process reliability with regard to very good, decorative – also coloured – anodising results
ACP 5754(R) Eloxpure® combines the excellent decorative anodisability of this alloy with the advantages of ACP aluminium cast products. ELOXPURE® stands out from the frequently used precision plate ACP 5754, ELOXPURE® offers increased process reliability with regard to the very good decorative surface. Even with colour-anodised parts. With consistent results ACP 5754(R) Eloxpure® therefore fulfils maximum technical and visual requirements.
Technical data / specific properties
Chemical Composition
EN AW-5754 (AlMg3) according to DIN EN 573-3
Material Properties
Machinability
good (HSC/HPC)
Weldability (TIG, MIG, EB)
very good (with SG-AlMg3)
Anodising Properties (technical / hard)
very good, decorative
Polishing
good
Corrosion Resistance
very good
Eroding Properties
good
Typical Mechanical Properties for standard sizes
Tensile Strength Rm
195-215 MPa (N/mm2)
0.2 % Yield strength Rp 0.2
90-100 MPa (N/mm2)
Elongation A
min. 15 %
Brinell Hardness
60 (+/- 5) HB
Typical Physical Properties
Density
2.66 g/cm3
Thermal Conductivity
140 – 160 W/(mK)
Electrical Conductivity
20 – 23 MS/m (m/Ω mm2)
Modulus of Elasticity
~70,000 N/mm2
Coefficient of Thermal Expansion
23.9 * 10-6/K
ACP 5754 Eloxpure® Standard Sizes
Thickness
5 – 250 mm
Width
1520 mm
Length
3020 mm
ACP 5754 Eloxpure® Special Sizes
Length
up to 6000 mm
(Maximum individual weight 5 t)
ACP 5754 Eloxpure® Tolerances for standard sizes
Surface Finish Ra
≤ 0.25 µm
Tolerance in Thickness
+/- 0.1 mm
Flatness
5 – 12 mm thickness ≤ 0.2 mm
> 12 – 250 mm thickness ≤ 0.13 mm
(Linear measuring section 1 m)
Tolerance in Width for plates
0/+10 mm
Tolerance in Length for plates
0/+10 mm
Tolerance (L/W) for cut pieces:
DIN ISO 2768-m
ACP 5754R Eloxpure® Standard Sizes
Thickness
8 – 340 mm
Width
1520 mm
Length
3020 mm
ACP 5754R Eloxpure® Special Sizes
Length
up to 6000 mm
(Maximum individual weight 20 t)
ACP 5754R Eloxpure® Tolerances for standard sizes
Surface
sawn on all sides
Tolerance in Thickness
0/+ 1.5 mm
Tolerance in Width for plates
0/+10 mm
Tolerance in Length for plates
0/+10 mm
Tolerance (L/W) for cut pieces:
0/+3 mm
(Other tolerances on request)
